تل: +8615690122018 البريد الالكترونى: [email protected]


Low Fin Tube For Heat Exchangers - DATANG زعنفة أنبوب مبادل حراري: حلول فعالة لنقل الحرارة لاحتياجاتك.

Fin Tube/

Low Fin Tube For Heat Exchangers

Standard ASTM B359/ASME SB 359
Material Red Copper T2/TP2,Cupronickel B7,Copper Nickel Iron Alloy BFe 10-1-1,BFe 30-1-1,Complex Brass Hsn 70-1,HA177-2,Carbon Steel,Stainless Steel,Titanium
Base Tube OD 12-25.4mm
Base Tube Thickness 1-1.5mm
Fin Height Max 1.45mm
FPI 19-50
Length Max 20m

  • Product Details
  • Product Attributes

Low fin tube is a heat exchange element that forms continuous spiral fins on the outer surface of the light tube through mechanical processing. It is mainly used in condensers, evaporators and other equipment of air conditioners to improve heat exchange efficiency.

Structure and process of low fin tube

The surface fins are processed by rolling method (three-roller oblique rolling). The base tube and the outer fins are tightly integrated into one, without contact thermal resistance or electrical corrosion problems, and have high anti-deformation ability.

Materials and Specifications for Low Fin Tubes

 

Category Materials Specifications
Base Tube • Carbon steel (10#, 20#)
• Stainless steel (304, 316L, 2205)
• Duplex steel/Titanium
• OD: 16–28 mm
• Wall thickness: 1.2–2.77 mm
Fin • Aluminum (1060, 1100)
• Copper/Steel
• Height: 0.8–1.45 mm (typically ≤1.5 mm)
• Pitch: 0.8–1.33 mm
General Parameters • Wall thickness after finning: 0.8–2.5 mm
• Pressure rating: ≤6 MPa

Key Notes:

  1. Material Combinations:
    • Carbon steel tube with aluminum fins: Cost-effective solution for general industrial use.
    • Stainless steel/Titanium tubes: Essential for corrosive or high-temperature environments.
  2. Customization:
    • Fin pitch and height adjustable to optimize heat transfer efficiency or reduce fouling.
  3. Typical Applications:
    • Condensers, evaporators, and chemical processing heat exchangers.

Main advantages of low fin tube

‌High heat exchange efficiency‌: The fins increase the surface area of ​​the tube and achieve higher heat exchange efficiency under the same metal consumption.

‌Stable structure‌: The base tube and the fin are integrated into one design, with strong anti-deformation ability and long service life.

Applicable scenarios of low fin tubes

Mainly used in the condenser of air conditioning refrigeration system, reducing energy consumption by enhancing heat exchange.

Manufacturing Range (Low Fin Tube/Integral Fin Tube):-

Sr. No

Particulars

Range

1

Base Tube Material

Stainless Steel, Carbon Steel, Alloy Steel, Titanium, Copper, Duplex Stainless Steel, and Inconel etc. (all material in the theoretical limit)

2

Base Tube Outside Diameter

12.70 mm to 38.10 mm

3

Base Tube Thickness

2.11 mm And Above

4

Base Tube Length

500 mm Min To 15000 mm

5

Fin Density

Up to 1023 FPM (26 FPI)

6

Bare Ends

As per Client Requirement

7

Manufacturing Capacity

7,00,000 Meter Per Annum

Prev:

Leave a Reply

حقوق النشر © 2024 www.dtfinnedtube.com جميع الحقوق محفوظة.

الهاتف +8615690122018

لينكد إن لينكد إن

Skype عاش:[email protected]

واتس اب +8615690122018

رمز الاستجابة السريعة WeChat وي تشات

ف ف 939249279

البريد الالكترونى [email protected]

العودة إلى الأعلى العودة إلى الأعلى

وي تشات

WeChat QR Code

امسح رمز الاستجابة السريعة ضوئيا باستخدام WeChat

اترك رسالة