Ambient Vaporizer Extruded Fin Tubes, Aluminum longitudinal star-shaped Finned Tubes are the basic components of Ambient Vaporizer&PBU vaporizer, on which heat transfer to be finished depends. Ambient vaporizer lined SS pipes are for High pressure vaporizer, mobile vaporizer and PBU vaporizer application.
Special-purpose aluminium material ,
high-efficiency and light design,
long life;
Oversize diameter for special-purpose aluminium fin-tube,
quick defrosting
Advanced high pressure tube combining technology makes the heat exchange tube and pressed tube closest touching , and ensure the
efficiency of heat exchange.
Cleaned and degreased for oxygen service
Aluminum Star Extruded Finned Tubes are the basic components of Ambient Vaporizer&Pressure Building Vaporizer, on which heat transfer to be finished depends. Aluminum Fin Tubes lined SS pipe for high pressure vaporizer, mobile vaporizer and pressure building vaporizer application which has high efficiency of heat transfer as well as bear high pressure or bumpy work conditions. Datang supplies Ambient vaporizer parts: Aluminum Finned Tubes with usual specification: ₵120-8fins, ₵160-8fins, ₵200-4fins,₵200-8fins, ₵200-12fins and more. The lined SS pipe OD is 20.5MM. The aluminum fin tube and stainless steel pipe are matched well in our advanced technology.
Special-purpose aluminium material ,high-efficiency and light design, long life; Oversize diameter for special-purpose aluminium fin-tube, quick defrosting Advanced high pressure tube combining technology makes the heat exchange tube and pressed tube closest touching , and ensure the efficiency of heat exchange. Cleaned and degreased for oxygen service.
Our air temperature vaporizer is made of 6063-T5 high-quality aluminum and Dia22x3.3mm 304 stainless steel. Precision sealed welding and reinforced structure, each evaporator unit will undergo non-destructive testing to ensure no gas leakage, and strength will be tested using water pressure. The ambient air evaporator does not require any assistance from electric heating equipment, which is environmentally friendly and energy saving. Our goal is to provide efficient and long-lasting heat exchange vaporizers for all users worldwide!
Datang Our advantage：
1. Our air temperature carburetor is made of 6063-T5 high quality pure aluminum, with fine welding process and strengthened structure, the fin thickness is 2.0mm, the corresponding outline of the center is 4mmTHK, the internal stainless steel pipe uses dia22x3.3mm 304 stainless steel, the transparency of the substrate is 15mm. Other factories may use low-quality, low-strength, thin aluminum profiles, which will reduce the heat exchange effect.
2. All the air-temperature carburetors of our company are welded by manual argon arc welding, argon must pass through the pipeline, and the welding gap of other factories may not be sealed well, resulting in gas leakage. 3. All surfaces of our carburetor in contact with oxygen are degreased according to oxygen requirements.
4. Each unit of our carburetor will undergo non-destructive testing to ensure that there are no gas leaks. We use nitrogen to test for leaks and water pressure to test for strength.
5. Before leaving the factory, our company properly packed and effectively transported the air temperature carburetor in accordance with the quality manual JB/T4711-2003 to prevent transportation deformation.
