電話: +8615690122018 Eメール: [email protected]


Waste Heat Recovery Finned Tubes Manufacturer | Datang Finned Tube

フィン付きチューブ/

Waste Heat Recovery Finned Tubes

Fin Tube Type Key Structure Best Applications Why You Should Choose It
HFW Serrated Finned Tubes Spiral welded fins with cut segments to create gas turbulence Gas turbine HRSG, petrochemical fired heaters Gives you the highest heat transfer efficiency for clean or low-dust gas.
HFW Solid Finned Tubes Continuous spiral fins welded solidly to the base tube Industrial boiler economizers, standard flue gas heat recovery Offers strong mechanical strength to handle frequent soot blowing.
H-Type / Double H-Type Finned Tubes Square symmetrical fins forming straight gas channels Coal-fired boilers, waste incinerators, cement kilns Prevents ash buildup and erosion in heavy-dust flue gas with low pressure drop.
Stainless Steel & Bimetallic Finned Tubes Corrosion-resistant base tubes (304/316L/ND Steel) or extruded aluminum fins Low-temperature condensing boilers, chemical exhaust Protects your heat exchanger against sulfuric acid dew point corrosion.

  • Product Details
  • Product Attributes

Waste Heat Recovery Finned Tubes

Are you looking for reliable finned tubes for your waste heat recovery project?

Waste heat recovery finned tubes help you recover heat from hot exhaust gases. They increase the external heat transfer area of your tubes. This helps improve heat exchange between flue gas and the working fluid inside the tubes.

At Cangzhou Datang Steel Pipe Co., 株式 会社。, we manufacture different types of finned tubes for industrial waste heat recovery systems. Our main products include high frequency welded finned tubes, H-type finned tubes and double-H finned tubes.

You can choose different materials, dimensions and fin structures for your project. We also support custom manufacturing based on your drawings and technical requirements.

Looking for suitable finned tubes for your project?We manufacture custom finned tubes for your Waste Heat Recovery Units (WHRU), Heat Recovery Steam Generators (HRSG), and boiler economizers.Contact Datang for technical support and a quotation.

Why Do You Need Finned Tubes for Waste Heat Recovery?

Many industrial processes produce hot exhaust gases. These gases carry a large amount of unused heat.Without a suitable heat recovery system, much of this heat escapes into the atmosphere.

Waste heat recovery finned tubes help you use this energy. Their fins increase the external surface area of the tubes. This improves heat transfer between hot flue gas and the fluid inside the tubes.

By using suitable finned tubes, you can:
Recover heat from industrial exhaust gases.
Improve heat transfer performance.
Preheat boiler feedwater.
Support steam generation.
Heat combustion air.
Reduce energy waste in industrial processes.

You can use different finned tube structures for different gas conditions and heat recovery requirements.

Types of Finned Tubes for Waste Heat Recovery

You need to choose the right fin structure for your operating conditions. Different finned tubes offer different advantages.Datang Finned Tube mainly provides the following types for industrial waste heat recovery applications.

High Frequency Welded Finned Tubes

High frequency welded finned tubes are widely used in industrial heat recovery systems.

During production, high-frequency resistance welding joins the steel fin strip to the base tube. The fin strip forms a continuous spiral around the tube.

This process creates a strong metallurgical bond between the fin and the tube.You can choose solid or serrated fin designs based on your project requirements.

Key Features:

  • Strong fin-to-tube welding.
  • Good heat transfer performance.
  • Suitable for high-temperature applications.
  • Available in carbon steel, alloy steel and stainless steel.
  • Custom fin height, thickness and pitch.
  • Suitable for industrial boilers and economizers.

If you need spiral finned tubes for high-temperature flue gas, high frequency welded finned tubes can be a suitable option.

Serrated Finned Tubes

Serrated finned tubes are widely used in industrial heat exchangers and waste heat recovery systems.

During production, the fin strip is cut into small sections along its edge to form a serrated structure. The serrated fin strip is then spirally welded to the base tube by high-frequency resistance welding.This design increases the exposed fin edges and helps improve gas-side heat transfer. It also creates more turbulence in the flue gas flow.You can choose different fin heights, thicknesses, pitches and serration designs based on your operating conditions.

Key Features:

  • Serrated spiral fin structure.
  • Strong fin-to-tube welding.
  • Increased fin-edge exposure.
  • Improved gas-side heat transfer.
  • Suitable for high-temperature flue gas applications.
  • Available in carbon steel, alloy steel and stainless steel.
  • Custom fin height, thickness and pitch.

If you need finned tubes for industrial exhaust gas heat recovery, serrated finned tubes can be a suitable option. You should consider flue gas temperature, dust content, gas velocity and cleaning requirements when selecting the fin structure.

H-Type Finned Tubes

H-type finned tubes are commonly used in boiler economizers and waste heat recovery systems.The fins have an H-shaped structure. They are welded to the base tubes by resistance welding.

The structure creates regular gas passages between the tubes. This helps control the gas flow and provides space for cleaning.H-type finned tubes are often used in flue gas systems with dust and ash.

Key Features:

  • H-shaped fin structure.
  • Stable fin-to-tube welding.
  • Regular gas flow passages.
  • Suitable for dusty flue gas conditions.
  • Convenient for soot blowing and cleaning.
  • Custom tube and fin dimensions.

If your flue gas contains dust or ash, you should consider the fin spacing, gas velocity and cleaning method when selecting H-type finned tubes.

Double-H Finned Tubes

Double-H finned tubes are another option for industrial boiler and heat recovery applications.

This structure uses two parallel tubes with H-shaped fins. It provides a larger heat transfer surface within a compact arrangement.You can use double-H finned tubes in boiler economizers and other industrial heat recovery equipment.

Key Features:

  • Double-tube structure.
  • Large heat transfer surface.
  • Regular gas passages.
  • Suitable for industrial boiler systems.
  • Available in different materials and dimensions.
  • Custom production according to your drawings.

You should consider gas-side pressure drop, ash accumulation and cleaning access when choosing double-H finned tubes.

Industrial Applications of Waste Heat Recovery Finned Tubes

You can use waste heat recovery finned tubes in many industries. They help you recover heat from exhaust gases and improve energy utilization.

Industrial Boilers and Economizers

Boilers produce hot flue gas during operation. An economizer uses this heat to preheat boiler feedwater.You can use high frequency welded finned tubes and H-type finned tubes in boiler economizers.

These tubes help increase the heat transfer area and recover more heat from exhaust gases.

Power Generation and Waste Heat Recovery(HRSG)

Power plants produce large amounts of waste heat during operation.You can use finned tubes in waste heat recovery boilers and other heat recovery equipment. They help transfer heat from exhaust gas to water or steam.

High-temperature gas turbine exhaust demands strong alloys. We supply ASTM A213 T11 and T22 serrated finned tubes to handle high pressure and thermal cycling safely.High frequency welded finned tubes and H-type finned tubes are common options for these systems.

Cement and Steel Industries

Cement kilns and steel production processes generate high-temperature exhaust gases.These gases often contain dust and ash.Heavy dust can quickly block standard tubes.

Our anti-fouling H-type finned tubes and wide-pitch solid fin tubes keep your exhaust flowing smoothly without clogging.You need to consider heat transfer, abrasion and ash accumulation when selecting finned tubes.

High frequency welded finned tubes and H-type finned tubes can be used in industrial waste heat recovery systems.

Air Preheaters

Air preheaters use recovered heat to warm incoming air.You can use finned tubes to transfer heat from hot flue gas to combustion air or other air streams.

This helps improve the thermal efficiency of boilers and industrial heating systems.

Petrochemical and Chemical Industries

Many chemical and petrochemical processes release heat through exhaust gases.You can use waste heat recovery finned tubes in suitable heat recovery equipment.

Material selection should consider gas composition, temperature and corrosion risks.Our ASTM A106 Gr.B and alloy HFW finned tubes capture waste heat efficiently in continuous refinery operations.

Waste Incineration Systems

Waste incineration plants produce high-temperature flue gas.You can use finned tubes in heat recovery boilers and other energy recovery equipment.You should consider corrosion, dust, ash deposits and cleaning requirements before selecting the tube structure.

How to Select Finned Tubes for Waste Heat Recovery?

Choosing the right finned tubes is important for your heat recovery system.You need to consider more than tube dimensions. Your actual operating conditions also affect product selection.

Operating Temperature

You should provide the flue gas inlet and outlet temperatures.You also need to consider the normal operating temperature and possible temperature changes.These details help you select suitable tube and fin materials.

Flue Gas Composition

Different industrial gases have different chemical properties.You should provide information about sulfur compounds, moisture and other corrosive components.This helps you evaluate the corrosion risk and select suitable materials.

Dust and Ash Content

Dust and ash can accumulate on the fin surface.If your flue gas contains a high level of dust, you need to consider fin spacing and gas passages.You should also provide details about the cleaning method, such as soot blowing or mechanical cleaning.

Corrosion and Wear

Some industrial flue gases can cause corrosion and surface wear.You need to consider gas composition, temperature, particle size and gas velocity.These factors help you choose a suitable tube material and fin structure.

Heat Transfer Requirements

You should provide your required heat duty and operating conditions.Important information includes gas flow rate, fluid flow rate, inlet temperature and target outlet temperature.These details help your engineering team evaluate the heat transfer requirements.

Why Choose Datang as Your Finned Tube Manufacturer?

When you select a finned tube manufacturer, you need more than a product supplier. You also need reliable production and technical support.

滄州大唐鋼管有限公司, 株式 会社. has been manufacturing industrial finned tubes since 2007.We provide different finned tube products for industrial heat transfer applications.We can manufacture finned tubes according to your drawings and technical specifications.You can discuss tube materials, fin dimensions, tube length and other requirements with our team.

Quality Control

Product quality affects the service life of your heat recovery equipment.We pay attention to raw material inspection, production control and finished product inspection.We check product dimensions and fin-to-tube bonding quality according to the applicable requirements.

Technical Support

You may need help with finned tube selection and technical specifications.You can share your application details and project drawings with us.Our team can discuss suitable product types and manufacturing options with you.

Frequently Asked Questions

1. What Is the Difference Between Solid and Serrated Finned Tubes for Waste Heat Recovery?

Solid finned tubes have continuous fins around the base tube. Serrated finned tubes have cuts along the fin edges.

Solid fins provide a continuous heat transfer surface. Serrated fins can improve gas-side turbulence and reduce some flow resistance under suitable conditions.

You should select the fin type based on heat transfer, pressure drop, dust and cleaning requirements.

2. Are High Frequency Welded Finned Tubes Suitable for High-Temperature Applications?

Yes. High frequency welded finned tubes are widely used in high-temperature industrial heat recovery systems.

Their operating limits depend on the base tube material, fin material, welding quality and working conditions.

You should confirm the design temperature and pressure before ordering.

3. Which Finned Tube Is Better for Dusty Flue Gas: Spiral Finned Tubes or H-Type Finned Tubes?

Both types can be used in industrial heat recovery systems.

However, H-type finned tubes provide regular gas passages and can offer better access for cleaning in suitable designs.

You should compare fin spacing, gas velocity, ash content and cleaning methods before making your choice.

4.How do you prevent ash fouling in dusty flue gas waste heat recovery?

You can choose our H-type finned tubes or increase the fin pitch to 8 mm – 12 mm. Straight gas channels and wider spacing let dust pass through easily and work well with your soot blowers.

5.Which material should I choose for low-temperature flue gas below 130°C?

You should use ND Steel (09CrCuSb) or SS316L for both the base tube and fins. These materials resist sulfuric acid dew point corrosion much better than standard carbon steel.

6.What is the pressure drop difference between serrated and solid finned tubes?

Serrated finned tubes create higher turbulence, which increases heat transfer by 15%–25% but adds slightly more air-side pressure drop. If your fan power is limited, solid finned tubes or H-type finned tubes give you lower resistance.

7.Can you manufacture finned tubes based on my CAD drawings or thermal data sheet?

Yes. Send us your drawings, material grades, and operating temperatures. Our engineering team will review your specs and confirm manufacturability before production..

What Information Should You Provide When Ordering Waste Heat Recovery Finned Tubes?

You should provide the following information:

Base tube material and dimensions.
Fin material and dimensions.
Fin pitch and fin height.
Tube length.
Required quantity.
Working temperature and pressure.
Application and flue gas conditions.
Technical drawings, if available.

These details help us understand your project and prepare a suitable quotation.Request a Quote for Waste Heat Recovery Finned Tubes

Request a Quote for Waste Heat Recovery Finned Tubes

Are you looking for a reliable waste heat recovery finned tube manufacturer?

滄州大唐鋼管有限公司, 株式 会社. provides high frequency welded finned tubes, H-type finned tubes and double-H finned tubes for industrial heat recovery applications.

You can send us your drawings, technical specifications or project requirements.

Our team will review your inquiry and discuss suitable manufacturing options with you.

Contact Datang today for product information and a quotation.

Website: httpsの://www.dtfinnedtube.com

Email: [email protected]

ワッツアップ: +86 156 9012 2018

Materials and Technical Specifications

Material selection is important for your waste heat recovery project.You need to consider operating temperature, pressure, flue gas composition and corrosion conditions.

Cangzhou Datang Steel Pipe can provide different base tube and fin materials according to your requirements.

Item High Frequency Welded Finned Tube Serrated Finned Tube H-Type Finned Tube Double-H Finned Tube
Base Tube OD 18 – 273 mm (Common: 25–159 mm) 25.4 – 273 mm (Common: 32–159 mm) 25.4 – 108 mm (Common: 38–76 mm) 25.4 – 108 mm (Common: 38–76 mm)
Tube Wall Thickness 2.0 – 20 mm 2.0 – 20 mm 2.0 – 12 mm 2.0 – 12 mm
Tube Length 1 – 30 m (Common: 6–12 m) 1 – 30 m (Common: 6–12 m) 1 – 12 m (Common: 3–6 m) 1 – 12 m (Common: 3–6 m)
Fin Height 6 – 25 mm (Common: 10–20 mm) 8 – 25 mm (Common: 12–20 mm) 10 – 25 mm per side (Common: 12–20 mm) 10 – 25 mm per side (Common: 12–20 mm)
Fin Thickness 0.8 – 3.0 mm (Common: 1.0–2.0 mm) 1.0 – 2.5 mm (Common: 1.2–2.0 mm) 1.5 – 3.5 mm (Common: 2.0–3.0 mm) 1.5 – 3.5 mm (Common: 2.0–3.0 mm)
Fin Pitch 4.0 – 25 mm (1–6.3 FPI) 4.5 – 25 mm (Common: 5.0–12 mm) Tube pitch: 60 – 160 mm (Custom) Tube pitch: 60 – 160 mm (Custom)
Fin Structure Solid spiral fin, no cuts Cut depth: 1/2 – 2/3 of fin height; Tooth width: 4 – 8 mm Two parallel fins welded with a center web into an "H" shape Twin-tube "H" structure, custom span by boiler tube spacing
Fin Material Carbon Steel, Stainless Steel, Alloy Steel Carbon Steel, Stainless Steel, Alloy Steel Carbon Steel, Stainless Steel, Alloy Steel Carbon Steel, Stainless Steel, Alloy Steel
Tube Material Carbon Steel, Stainless Steel, Alloy Steel Carbon Steel, Stainless Steel, Alloy Steel Carbon Steel, Stainless Steel, Alloy Steel Carbon Steel, Stainless Steel, Alloy Steel
Fin Design Solid Serrated H-Type Double-H
Manufacturing Standard ASTM, ASME, EN, DIN ASTM, ASME, EN, DIN ASTM, ASME, EN, DIN ASTM, ASME, EN, DIN
Manufacturing Process High Frequency Resistance Welding High Frequency Resistance Welding Resistance Welding Resistance Welding

You can send us your drawings or technical specifications. We will review your requirements and confirm the available production options.

Prev:

Leave a Reply

著作権 © 2024 www.dtfinnedtube.com 全著作権所有.

電話 +8615690122018

LinkedInの LinkedInの

スカイプ 住む:[email protected]

ワッツアップ +8615690122018

WeChatのQRコード ウィーチャット

QQの 939249279

Eメール [email protected]

トップに戻る トップに戻る

ウィーチャット

WeChat QR Code

WeChatでQRコードをスキャン

伝言を残しておいて下さい