Тель: +8615690122018 Электронная почта: [email protected]


Low Fin Tube For Heat Exchangers - Ребристый теплообменник DATANG: Эффективные решения по теплопередаче для ваших нужд.

Ребристая трубка/

Low Fin Tube For Heat Exchangers

Standard ASTM B359/ASME SB 359
Материал Red Copper T2/TP2,Cupronickel B7,Copper Nickel Iron Alloy BFe 10-1-1,BFe 30-1-1,Complex Brass Hsn 70-1,HA177-2,Carbon Steel,Нержавеющая сталь,Titanium
Base Tube OD 12-25.4миллиметр
Base Tube Thickness 1-1.5миллиметр
Высота плавников Max 1.45mm
FPI 19-50
Length Max 20m

  • Подробнее о продукте
  • Характеристики продукта

Low fin tube is a heat exchange element that forms continuous spiral fins on the outer surface of the light tube through mechanical processing. It is mainly used in condensers, evaporators and other equipment of air conditioners to improve heat exchange efficiency.

Structure and process of low fin tube

The surface fins are processed by rolling method (three-roller oblique rolling). The base tube and the outer fins are tightly integrated into one, without contact thermal resistance or electrical corrosion problems, and have high anti-deformation ability.

Materials and Specifications for Low Fin Tubes

 

Category Materials Specifications
Base Tube • Carbon steel (10#, 20#)
• Stainless steel (304, 316L, 2205)
• Duplex steel/Titanium
• OD: 16–28 mm
• Wall thickness: 1.2–2.77 mm
Fin • Aluminum (1060, 1100)
• Copper/Steel
• Height: 0.8–1.45 mm (typically ≤1.5 mm)
• Pitch: 0.8–1.33 mm
General Parameters • Wall thickness after finning: 0.8–2.5 mm
• Pressure rating: ≤6 MPa

Key Notes:

  1. Material Combinations:
    • Carbon steel tube with aluminum fins: Cost-effective solution for general industrial use.
    • Stainless steel/Titanium tubes: Essential for corrosive or high-temperature environments.
  2. Customization:
    • Fin pitch and height adjustable to optimize heat transfer efficiency or reduce fouling.
  3. Typical Applications:
    • Condensers, evaporators, and chemical processing heat exchangers.

Main advantages of low fin tube

‌High heat exchange efficiency‌: The fins increase the surface area of ​​the tube and achieve higher heat exchange efficiency under the same metal consumption.

‌Stable structure‌: The base tube and the fin are integrated into one design, with strong anti-deformation ability and long service life.

Applicable scenarios of low fin tubes

Mainly used in the condenser of air conditioning refrigeration system, reducing energy consumption by enhancing heat exchange.

Manufacturing Range (Low Fin Tube/Integral Fin Tube):-

Sr. No

Particulars

Range

1

Материал базовой трубки

Нержавеющая сталь, Carbon Steel, Alloy Steel, Titanium, Медь, Duplex Stainless Steel, and Inconel etc. (all material in the theoretical limit)

2

Base Tube Outside Diameter

12.70 mm to 38.10 миллиметр

3

Base Tube Thickness

2.11 mm And Above

4

Длина базовой трубы

500 mm Min To 15000 миллиметр

5

Fin Density

Up to 1023 FPM (26 FPI)

6

Bare Ends

As per Client Requirement

7

Manufacturing Capacity

7,00,000 Meter Per Annum

Предыдущая:

Оставь ответ

Авторское право © 2024 www.dtfinnedtube.com Все права защищены.

Телефон +8615690122018

LinkedIn LinkedIn

Скайп жить:[email protected]

Ватсап +8615690122018

QR-код WeChat WeChat

QQ 939249279

Электронная почта [email protected]

Наверх Наверх

WeChat

WeChat QR Code

Отсканируйте QR-код с помощью WeChat

Оставьте сообщение